NuGear® SC
HEAVY-DUTY ENGINE & COMPONENT CLEANER
Aqueous cleaning compound for aircraft engine & component degreasing operations
HAND CLEANING/LOCAL APPLICATION
1. Dilute NuGear® SC 1:4 to 1:10* with water.
2. Apply to surface in shallow wash tank or by mop or spray.
3. Loosen surface material with non-metallic bristle brush, reapplying solution continuously.
4. Follow with water rinse reapply if necessary.
5. Wipe dry with terry towel.
HEAVY-DUTY CLEANING/HOT IMMERSION TANK/SPRAY CABINET
1. Use NuGear® SC full strength or dilute 1:2 to 1:4* with water
2. Allow to soak at 120 – 140°F (49 – 60°C).
3. Effective concentration can be maintained with periodic addition of fresh NuGear SC.
QUESTIONS? NUVITE technicians have the answers 800.394.8351
Keep in mind: When using any NUVITE product, please refer to appropriate procedures and recommendations for use and equipment, or contact a NUVITE technician for more information, unique applications and special requirements. *Product dilution where applicable is determined by extent, condition & soil type.
© Nuvite Chemical Compounds 2017 | All Right Reserved. |